Installing and Controlling Dionex Devices
Active Flow Splitter (MRA): Overview

 

Device Type:

Active flow splitter

Device Driver:

Dionex: Active Flow Splitter (MRA)

Hardware Options
Supported:

59 HPLC flow combination and LC/MS split ratios from 100:1 to 100,000:1

 

What is required?

License:

Timebase Class 1

 

Connection:

Use the modem cable (Sub-D 9 female to Sub-D 9 female) shipped with the flow splitter.

 Note:  

The standard Dionex modem cable does not provide two female connectors. That is why you cannot use the Dionex modem cable in this case.

Hardware
Prerequisites:

A free COM port is required for each single splitter.

 

Further Information

For information about how to install the flow splitter, refer to  Active Flow Splitter (MRA): Installation.

For an overview of the different Dionex devices that are distributed at present, refer to  Installing Dionex Devices.