Installing and Controlling Third-Party Devices
Nelson Interfaces: Properties

VoltageRange

This value specifies the voltage range of the A/D converter (maximum signal). Any voltage exceeding this value is cut (by the box). The Over Range lamp of the box will light.

This parameter directly affects the signal resolution.

Channels

Indicates on which channels the box records data. Usually, the channels are set automatically; this setting should not be changed.

SamplingStep

This is the actual interval the box uses for data recording. If possible, this interval is set automatically to correspond to the STEP of the channels. This setting will produce the best results.

With the setting SamplingStep < 0.1 s, the signal resolution will decrease.

For more information about how to install the Nelson Interfaces, refer to:

 Nelson Interfaces: Installation

 Nelson Interfaces: Overview

 Nelson Interfaces: Connections

 Nelson Interfaces: Device Driver Configuration

 Nelson Interfaces: Data Acquisition Restrictions

 Nelson Interfaces: Differences from Conventional Nelson Box Installations